Specification Air Shower

Foreword

Honorable customers,

Thanks for choosing our purifying equipment!

Please read this introduction carefully before you use the air shower.

This brochure will introduce all specialties about the air shower. It is designed according to the principle of clean room. Please read the brochure with additional introduction if you use the special products. Meantime, this brochure will not explain to the products which just the material or size are changed. By safety reason, please reading carefully and safekeeping for reference.

In order to operate safely, please the appointers who supervise the machine must be professional. When the machine has any problem,  you contact the appointed person or our company please.

We possess of excellent teams for our after-sales service in order to get perfect service. The satisfaction of customers is our target. If you have any questions, please do not hesitate to contact us.

Hot-line: 0086 18038493642

Content

1. Safety knowledge………………………………………………………………...............

  1. Product characteristic and use
  2. Using in environment
  3. Safety terms

2. Technology feature……………………………………………………………….............

3. Configuration characteristic and principle…………………………………………

  1. Configuration characteristic
  2. Principle

4. Installation……………………………………………………………………….................

5. Control panel and key-press description ………………………………………....

6. Usage……………………………………………………………………………..................

7. Troubleshooting…………………………………………………………………..............

8. Maintenance……………………………………………………………………................

9. Transportation and store………………………………………………………….........

10. Unpacking and examination…………………………………………………….......

  1. Warranty paper and equipment warranty card……………………........
  1. Test report .........................................................................

 

1. Safety knowledge

i. Product characteristic and usage

The air shower is a necessary channel for people or goods entering into the clean room in order to minimize the amount of particulate contaminants. Personnel move through the air shower while the particulate contaminants are blow off by the clean high air velocity. It be widely used in electronics, micro-electronics, precision instruments, laboratory equipments, food processing, beverage, aviation, pharmacy, optical electricity, semiconductor etc.

ii. Using in environment

◆ Temperature: 5℃ - 35℃

◆ Relative humidity: less than 85% (+35℃)

◆ Atmospheric pressure: 86Kpa – 106Kpa

◆ The max dust concentration: 3500 granule/liter (dust particle less than 0.5µm)

◆  Power supply: 380v; 50Hz; 3 phase

iii. Safety events

The basis of safety terms

● Don’t set the equipment up on a big dirty and easy shaky place.

● Don’t use some erodible , diluent or solvent liquid to wipe the equipment to avoid loss color or destroy the paint.

● Forbid to use the following place: low temperature, high temperature, humid, lampblack, fog place etc.

● Don’t scratch the surface of stainless steel by your hand or any petrous stuff.

● The safety about electricity

● Set the equipment up firstly and then get the electricity.

● Please confirm the power supply before you use the equipment.

● The fan’s power is 380v; 3 phase. The fan will be reversal eddy if you connect reservedly, then the speed will be reduced or naught. Now, you just change any phase .It will be ok.

 

The safety events about operation

● This equipment has not blastpro of. Please don’t use this machine in a explosive place.

● In a normal atmosphere condition, this machine’s outlier resistance should be more than 20mΩ and the outlier resistance should be more than 2mΩ after humidity test.

● Don’t repeat on or off the switch in one minute, that can protect the machine.

● The door will be interlocked when it get power. Meanwhile, you just can open one door. The interlocked system will be out of control if you open the two doors in the same time.

● The air shower will be work when you get in and the door closed. After air shower is finished, the entrance was closed. You only out by exit door. You can not to exit from the entrance that will be destroying the interlocked system.

● In air shower working time, you can push the stop button to cancel the program and then you can open the two doors.

● If you find any problem in the operation, please stop the program or cut off the power supply and then contact supervisor or our staff.

● You must cut off the power supply before you troubleshooting in order to keep you and machine safely.

● Forbid to refit the machine to avoid getting an electric shock or fire. We have warranty without refit of machine.

● Don’t put the heavy stuff on the wire and push the wire. If the wire is destroyed, it is easy to get an electric shock or fire.

● Don’t use the fuse over the limit when you change the new fuse.

● Please cut off the power supply in a period of long-team suspension.

● Please ensure grounding.

2. Technology feature

Product name: AIR SHOWER

ED: 1290*1000*2050mm

ID: 790*930*1910mm

Material: SUS304,or powder coating outside, inner ss304

Air velocity of fan: 1200m3/h

Electrical interlock

Automatic control system

Emergency switch inside and outside

Nozzle in stainless steel: 12pcs

HEPA filter: 630×630×69mm  99.99%@0.3um

Pre-filter: 775×380×17mm G3

Fluorescent lamp:1pc

Power supply: 380V. 50Hz, 3Phase

 

3. Configuration characteristic and principle

1) Configuration characteristic

  1. It is a patent design. The corner of external box is arc angle. (We can design the corner of external box for right angle by customized.)
  2. It adopts automatic control system. Also, it has inter locker, infrared detector. When the person come in the chamber, the two doors will be locked and the machine will be work automatically.
  3. The external material is stainless steel or cold rolled steel. Regarding the cold rolled steel ,it adopts pickling technology and painted disposal for anti static 
  4. The door, door frame, handle, thicker floor and nozzle all is stainless steel.
  5. It adopts digital display and adjustable working time system on the display.

2) Principle

After air through the pre-filter, the special fan press the air to the HIP box, then the air through HEPA filter. Finally, the high clean air comes out from the nozzle. Meanwhile, the high clean air can clean the dust particle from persons or goods quickly.

 

4. Installation

1) For considering the usage period, we kindly advise you to set the machine up in the room, which has 100 thousand class or better.

2) The installation place should be away from the volume dust .

3) The steps for installingunassembled machine:

Confirm the placeà Lay the bottom boardà Set box upà Tighten the screws between board and boxà Install the doorà Tighten the screws between door and boxà Install the top boardà Tighten the screws between top board and boxà Adjust all joint screwsà Connect electrical wire à Install the control panelà Debugà Check

 

5. Control panel and key-press description

A. control panel 

Control panel and key-press description
  1. A.key-press in air shower control panel:

1. E-stopThe red e-stop induction turn on once press the e-stop key-press at any time, and all outlet will be cut off automatically except the light. Once pressed it again, the system will come back the initialed state. This key-press is mainly used in the state of unlocking the entrance and exit door, stopping the air showering automatically and other maintenance.

2. Air shower: Pressed the key-press after the entrance and exit door are locked, system is turning to the showering process. This key-press is mainly used in the state of door magnet or infrared inductor is out of control or fan maintenance.

3. Light: the air shower lighting can be on and off once press the light key-press. This key-press is mainly used in the state of the door magnet is out of control or light maintenance.

4. up time and down time: It not only can prolong the showering time when press this key-press before or after showering but also can adjust or option in the inner parameter setting.

 

  1. B.air shower inductor light and digital pie display

1.air shower countdown display: It is double red digital pie display, when working it display the showering time setting and showering leavings time and menu parameter when setting menu.

2. Entrance door open: This light is on when the entrance door is opened. It can be checked weather the outside magnet is ok.

3. RF switch: This light is on when body at the induction area. It can be checked weather the photoelectricity switch is ok.

4. exit door open: This light is on when the exit door is opened. It can be checked weather the exit door magnet is ok.

5. air shower: When the fan is turned on automatically or by hand, this light is on.

6. e-stop: It is at the emergency state when this light is on.

7. light: The light is turned on when someone press the light key-press and it can be press for on and off again.

Warning: Please do not touch any key during operation.

  1. C.Circuit board diagram, input and output description1. Strong AC input inlet

    a. power supply: 220VAC (silk-screen is 220V AC)

    2. Strong AC output inlet

    a. fan: 1A 220VAC ( connected AC wire, silk-screen is fan)

    b. lighting: 1A 220VAC (it can connect the relay if many lights, silk-screen is lighting indicator)

    c. working indicator: 1A 220VAC (silk-screen is working indicator)

    d. power indicator:1A 220VAC (silk-screen is power indicator)

    3. Weak AC input inlet

    b. outside door magnet switch: silk-screen is outside door magnet

    c. infrared inductor switch: silk-screen is infrared

    4. Weak AC output inlet

    a. infrared switch power supply: 12VCD (silk-screen is 12V GO)

    b. outside door lock: 200Ma DC12V (outside door lock)

    c. inside door lock: 200Ma DC12V (inside door lock)

6. Usage 

  1. A.description for air shower working parameter setting

1. System has one outer time parameter setting: It can modify the showering time setting, outer parameter setting through the up time and down time key-press directly. 

2. In parameter setting, the air shower comes into the state of inner parameter setting when press the e-stop key-press for 3 seconds continuously. At the same time, it shows SJ in digital pie. e-stop key-press is used as setting key-press, air shower key-press is used as changed-page key-press, up time and down time key-press is used for adjusting setting parameter. For example, when pressed the air shower key-press, the digital pie will shower TI. TO. TC. TL. Td. Tn6 circularly. Press the up time and down time key-press will shower the parameter of prolong time or function state. System has 4 inner time and 2 function parameter setting: TI extrance door unlock prolong setting. TO exit door unlock prolong setting, TC air shower unlock setting, TL light prolong setting, Td function setting, Tn door exchanged setting. After setting, it will save and come back setting state if there is no operation in 5 seconds.

  1. B.air shower working parameter setting operation

1. Air shower time setting: this is option for outer time parameter. The showering prolong time can be changed through up time and down time key-press before or after showering, the adjustment time us 1-99 seconds, and it also will show on double digital pie. 5 seconds later, system will save the parameter automatically.

2. Entrance door unlocking prolong setting: This is option for inner time. When pressed the e-stop key-press continuously for 3 seconds, digital pie will show: SJ system comes to the inner parameter setting; When pressed air shower key-press, digital pie will show: TI and pressed up time and down time key-press again, entrance door unlock prolong time can be checked and the unit is second. It can be adjusted from 0-99 seconds through pressed up time and down time key-press, confirmed and came to next option through pressed air shower key-press. If there is no operation in 5 seconds, system will save parameter and exit the setting.

3. exit door unlocking prolong setting TO: after finish entrance door setting, it still needs to press the air shower key-press during in 5 seconds, then comes to the exit door unlock setting (TO), it can be checked and adjusted during 0-99 seconds through pressed up time and down time key-press. confirmed and came to next option through pressed air shower key-press. If there is no operation in 5 seconds, system will save parameter and exit the setting.

4. Prolong unlocking setting after showering TC:

After finish light setting, pressed air shower key-press again during in 5seconds, it comes to prolong unlocking setting, checked and adjusted light prolong time from 0-99minutes through up time and down time key-press. confirmed and came to next option through pressing air shower key-press. If there is no operation in 5 seconds, system will save parameter and exit the setting.

5. Function setting Td.

Setting 0 is common type, the process is entrance - induction – showering exit. Setting 1 is non-induction type; the process is “entrance – showering – exit. Setting 2 is no door type, the process is “induction – showering

6. Door exchanged function setting Tn

There are two states for door exchanged function setting: 0 and 1. setting 0 is regulate statesetting 1 is exchanged. For example, once the front and back door are exchanged in live fixing and fixed up the setting is 1, it will change to regulate state.

  1. C.air shower working process

1. Enter into clean area

1.1 Opened the outside door who want to enter into the clean area, the inside lock will be locked automatically in order to prevent un-clean air come into the clean area, and at the same time, light in the air shower and working light induction outside will turn on.

1.2 After entered into the air shower and closed the outside door, the voice prompting system will say “Please step into the induction area”. The infrared system begins to check weather there is someone. If yes, it will turn to showering process.

1.3 Outside and inside door will be locked before showering. The fan will ran and begin to showering, meanwhile, the countdown is beginning to count. The voice prompting system will say “Please turn your body 360 degree during operation

1.4 If system check there is nobody in the air shower after outside door is closed, inside door will be unlocked automatically and come back to the waiting state and the infrared will continue to check, if there is someone, inside and outside door will locked and begin to showering.

1.5 In the process of showering, when someone press the up time and down time key-press, the voice prompting system will say “Please dont press any key during operation”

1.6 In the process of showering, when someone press the e-stop key-press, it will stop showering, and press the key-press again, the state will be cancel 

1.7 After showering, inside door will be unlocked. The voice prompting system will say “Operation is completedplease leave through the back door back door”.

1.8 When someone exit from the air shower and inside door is closed, system will return to initial state and wait to next usage.

1.9 After showering and inside door are unlocked, if someone still do not leave the air shower after in the stated time, system will default that someone is out and system will come back to the waiting state.

1.10 After the light is on, if there is no operation in the stated time, the light will be off automatically.

 

2. Exit the clean area

2.1 Opened the inside door, the outside door locked will be locked automatically, light in air shower and working indication light will be on.

2.2 Enter into the air shower, closed the inside door and system begin to check weather there is someone in it, if not, inside and outside door will be unlocked.

2.3 If checked there is someone in it, when someone open the outside door, the inside door will be locked. If closed the outside door, system will back to initial state.

2.4 If happened special state, people can choose back to clean area. When someone open the inside door and outside door is locked, system will come back to initial state.

2.5 After opened outside door and system checked that there is nobody in it in stated time, at this time if opened the outside door, system will enter into clean area process; if opened the inside door, system will exit clean area process.

2.6 After the light is on, if there is no operation in the stated time, the light will be off automatically.

7. Troubleshooting

Malfunction

Reason

Solution

Average velocity lower or higher than the rating. 3 phase is connected wrong Adjust 3 phase
If 3 phase is connected right, the air velocity is still low 1. The pre-filter gather a lot of dust. 2. The HEPA filter is not working. 1. Washing the pre-filter or change new one.

2. Change the new HEPA filter.

The fan is not working. The connection of fan power has some problem. Checking the connection of fan power.

8. Maintenance

1) By the clean rate of environment, usually change pre-filter about 1-6 months and HEPA filter about 6-12 months.

2) Usually, supervisor should be checking the clean rate of clean zone by the particle counter in each two months. If the checking result isn’t noncoincidence with the required rate, please check it. (Leak or the HEPA filter is null). If the HEPA filter is not working, please change new one.

3) Please cut off the power supply when you change the pre-filter or HEPA filter.

4) Attention about changing the HEPA filter:

● Please ensure the filter paper with intactness when you change the HEPA filter. Don’t touch the filter paper.

● Please check the HEPA filter in a bright place before you change it. If the filter paper with any leak, please don’t use it.

●  When you change the HEPA filter, please open the lid firstly, and then take the press stick off. Finally, take the null filter out, and change the new one. (Please the arrow of HEPA filter should be coincidence with air flow arrow.) Meantime, you will set back the lid up before ensuring the frame was airproofed.

9. Transportation and store

1) Transportation: It is suitable for normal conveyance, but it can’t put sidle and impacting. Meanwhile, please don’t put it directly down below sunning, raining or snow.

2) Store: the packing equipment should place in a breezy warehouse with the humidity of no more than 85%. Meantime, the environment can’t contain any acidic, alkaline or corrosive air.

3) The expiration of filter is available in 180 days in packing state.

10. Unpacking and examination

1) Please open the packing with attention.

2) Please check the product is right after unpacking, and then checks everything with packing list. If found any wrong, please contact us in one week.

Warranty

Notice:

1) From the date you buy this production, we would start to calculate the guarantee. In guarantee period, if in correct operation status, the production has any problem, we would supply service for free. The customer should save this document and supply it to us when you need service. Normally, the guarantee period is 12 months.

2) We will provide a charged service for the follow status:

  1. Customers can’t to show the warranty or valid receipt.
  2. The warranty hasn’t the stamp, date and retailer’s name. The malfunction caused by the operation method, which it didn’t follow the introduction.
  3. The malfunction caused by disassemble, repair and refit without manufacturer authorization.

3) The warranty’s item must be written by the customers and the period for 12 months.

4) We can’t renew the warranty for any missing.

 

Maintenance record:

 

Maintenance date Malfunction and solving

Transactor

Sign for examination
       
       
       
       

 

Product   Period of validity  
Model №  
Producing date  

 

The follow the table be wrote by the retailer.

Customers name

 

Contact №

 

Address

 

Postcode

 

Purchase date

 

 

Retailer (with stamp) Guangzhou YN Co., Ltd.
Contact name   Telephone 86 0769 89202768

 

  EWZ110704

Post time: Oct-09-2022